STM32 Nucleo-F767ZI

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on Github.

View Doxygen Documentation View this board's documentation as generated by Doxygen.

View on GitHub View this board's source code on GitHub.

Tip

When using this board with RIOT, set the BOARD variable to nucleo-f767zi in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= nucleo-f767zi

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the STM32 Nucleo-F767ZI

Overview

The Nucleo-F767ZI is a board from ST’s Nucleo family supporting ARM Cortex-M7 STM32F767ZI microcontroller with 512KiB of RAM and 2 MiB of Flash.

You can find general information about the Nucleo144 boards on the boards_common_nucleo144 page.

Pinout

MCU

MCU	STM32F767ZI
Family	ARM Cortex-M7
Vendor	ST Microelectronics
RAM	512KiB
Flash	2MiB
Frequency	up to 216 MHz
FPU	yes
Ethernet	10/100 Mbps
Timers	18 (2x watchdog, 1 SysTick, 2x 32-bit, 13x 16-bit)
ADCs	3x 12 bit (up to 24 channels)
UARTs	4
I2Cs	4
SPIs	6
CAN	3
RTC	1
Datasheet	Datasheet
Reference Manual	Reference Manual
Programming Manual	Programming Manual
Board Manual	Board Manual

Flashing the Board

A detailed description about the flashing process can be found on the guides page. The board name for the Nucleo-F767ZI is nucleo-f767zi.