STM32 Nucleo-L011K4

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on Github.

View Doxygen Documentation View this board's documentation as generated by Doxygen.

View on GitHub View this board's source code on GitHub.

Tip

When using this board with RIOT, set the BOARD variable to nucleo-l011k4 in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= nucleo-l011k4

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the STM32 Nucleo-L011K4

Overview

The Nucleo-L011K4 is a board from ST’s Nucleo family supporting ARM-Cortex-M0+ STM32L011K4 microcontroller with 2KiB of RAM and 16KiB of Flash.

You can find general information about the Nucleo32 boards on the boards_common_nucleo32 page.

Pinout

MCU

MCU	STM32L011K4
Family	ARM Cortex-M0+
Vendor	ST Microelectronics
RAM	2KiB
Flash	16KiB
Frequency	up to 32MHz
FPU	no
Timers	7 (3x 16-bit, 1x RTC, 1x Systick, 2x Watchdog)
ADC	1x 12-bit (10 channels)
UARTs	2 (one USART and one Low-Power UART)
SPIs	1
CANs	0
RTC	1
I2Cs	1
Vcc	1.65V - 3.6V
Datasheet	Datasheet
Reference Manual	Reference Manual
Programming Manual	Programming Manual
Board Manual	Board Manual

Flashing the Board

A detailed description about the flashing process can be found on the guides page. The board name for the Nucleo-L011K4 is nucleo-l011k4.