STM32 Nucleo-L031K6

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on Github.

View Doxygen Documentation View this board's documentation as generated by Doxygen.

View on GitHub View this board's source code on GitHub.

Tip

When using this board with RIOT, set the BOARD variable to nucleo-l031k6 in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= nucleo-l031k6

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the STM32 Nucleo-L031K6

Overview

The Nucleo-L031K6 is a board from ST’s Nucleo family supporting ARM Cortex-M0 STM32L031K6T6 microcontroller with 8KiB of RAM and 32KiB of Flash.

You can find general information about the Nucleo32 boards on the boards_common_nucleo32 page.

Pinout

MCU

MCU	STM32L031K6
Family	ARM Cortex-M0+
Vendor	ST Microelectronics
RAM	8KiB
Flash	32KiB
Frequency	up to 32MHz
FPU	no
Timers	8 (4x 16-bit, 1x RTC, 1x Systick, 2x Watchdog)
ADC	1x 12-bit (10 channels)
UARTs	2 (one USART and one Low-Power UART)
SPIs	2
CANs	0
RTC	1
I2Cs	1
Vcc	1.65V - 3.6V
Datasheet	Datasheet
Reference Manual	Reference Manual
Programming Manual	Programming Manual
Board Manual	Board Manual

Flashing the Board

A detailed description about the flashing process can be found on the guides page. The board name for the Nucleo-L031K6 is nucleo-l031k6.