STM32C0316-DK

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on Github.

View Doxygen Documentation View this board's documentation as generated by Doxygen.

View on GitHub View this board's source code on GitHub.

Tip

When using this board with RIOT, set the BOARD variable to stm32c0316-dk in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= stm32c0316-dk

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the STM32C0316-DK board.

General information

The ST STM32C0316-DK is an evaluation board supporting a ARM Cortex-M0 STM32C031C6 microcontroller with 8KB of RAM and 32KB of ROM Flash.

Pinout

See this application note as reference. This means the responsibility is on the firmware configurer to take special care when configuring IO, ensuring that ports are not conflicting on each pin.

Flashing the Board

A detailed description about the flashing process can be found on the guides page. The board name for the STM32C0316-DK is stm32c0316-dk and the default programmer is OpenOCD. Please note that the STM32C0 series is only supported by OpenOCD versions newer than 0.12.0.