STM32 Nucleo-64

View API DocumentationView API documentation generated by Doxygen.

View on GitHubView this source code on GitHub.

Support for STM32 Nucleo-64 Boards

Related Boards

Common Board GroupsCommon definitions and implementations for board groups

STM32 Nucleo-C031C6Support for the STM32 Nucleo-C031C6

STM32 Nucleo-C071RBSupport for the STM32 Nucleo-C071RB

STM32 Nucleo-F030R8Support for the STM32 Nucleo-F030R8

STM32 Nucleo-F070RBSupport for the STM32 Nucleo-F070RB

STM32 Nucleo-F072RBSupport for the STM32 Nucleo-F072RB

STM32 Nucleo-F091RCSupport for the STM32 Nucleo-F091RC

STM32 Nucleo-F103RBSupport for the STM32 Nucleo-F103RB

STM32 Nucleo-F302R8Support for the STM32 Nucleo-F302R8

STM32 Nucleo-F303RESupport for the STM32 Nucleo-F303RE

STM32 Nucleo-F334R8Support for the STM32 Nucleo-F334R8

STM32 Nucleo-F401RESupport for the STM32 Nucleo-F401RE

STM32 Nucleo-F410RBSupport for the STM32 Nucleo-F410RB

STM32 Nucleo-F411RESupport for the STM32 Nucleo-F411RE

STM32 Nucleo-F446RESupport for the STM32 Nucleo-F446RE

STM32 Nucleo-G070RBSupport for the STM32 Nucleo-G070RB

STM32 Nucleo-G071RBSupport for the STM32 Nucleo-G071RB

STM32 Nucleo-G431RBSupport for the STM32 Nucleo-G431RB

STM32 Nucleo-G474RESupport for the STM32 Nucleo-G474RE

STM32 Nucleo-G491RESupport for the STM32 Nucleo-G491RE

STM32 Nucleo-L053R8Support for the STM32 Nucleo-L053R8

STM32 Nucleo-L073RZSupport for the STM32 Nucleo-L073RZ

STM32 Nucleo-L152RESupport for the STM32 Nucleo-L152RE

STM32 Nucleo-L433RCSupport for the STM32 Nucleo-L433RC

STM32 Nucleo-L452RESupport for the STM32 Nucleo-L452RE

STM32 Nucleo-L476RGSupport for the STM32 Nucleo-L476RG

STM32 Nucleo-U385RG-QSupport for the STM32 Nucleo-U385RG-Q

STM32 Nucleo-WL55JCSupport for the STM32 Nucleo-W55JC

STM32 P-Nucleo-WB55Support for the STM32 P-Nucleo-WB55

Using LED0 and SPI at once

Due to a pin conflict on Nucleo64 boards, you can not use the SPI peripheral and LED0 at the same time. A warning will be shown during compile time:

Warning: Using periph_spi on Nucleo64 boards will disable LED0 due to pin conflicts.

Flashing the Board

A detailed description about the flashing process can be found on the guides page.

Accessing the RIOT shell

The default RIOT OS shell access utilizes the ST-Link VCP (Virtual COM Port) that is featured on every Nucleo board. The USART used for this connection varies between the different Nucleo variants, so you have to consult the nucleo-xxxxx/include/periph_conf.h header file for more information.

The default baud rate is 115200, 8N1.