Adafruit Clue

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on Github.

View Doxygen Documentation View this board's documentation as generated by Doxygen.

View on GitHub View this board's source code on GitHub.

Tip

When using this board with RIOT, set the BOARD variable to adafruit-clue in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= adafruit-clue

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the Adafruit Clue

General information

The Adafruit Clue board is an opensource, micro development kit using the nRF52840 SoC. This board provides 802.15.4 and BLE connectivity.

Schematics

The board detailed description and schematic is available here.

Flash the board

The board is flashed using its on-board bootloader. More information about how to work with this bootloader can be found in the boards_common_adafruit-nrf52-bootloader section.

Accessing STDIO via UART

The STDIO is directly accessible via the USB port. On a Linux host, it’s generally mapped to /dev/ttyACM0.

Use the term target to connect to the board serial port

    make BOARD=adafruit-clue -C examples/basic/hello-world term