STM32 Nucleo-G491RE

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on Github

View API Documentation View API documentation generated by Doxygen.

View on GitHub View this source code on GitHub.

Support for the STM32 Nucleo-G491RE

Tip

When using this board with RIOT, set the BOARD variable to nucleo-g491re in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= nucleo-g491re

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the STM32 Nucleo-G491RE

Overview

The Nucleo-G491RE is a board from ST’s Nucleo family supporting a ARM Cortex-M4 STM32G491RE microcontroller with 112KiB of RAM and 512KiB of Flash.

You can find general information about the Nucleo64 boards on the boards_common_nucleo64 page.

Pinout

MCU

MCU	STM32G491RE
Family	ARM Cortex-M4
Vendor	ST Microelectronics
RAM	112KiB
Flash	512KiB
Frequency	up to 170MHz, clocked to 170MHz in RIOT
Timers	15 (2x watchdog, 1 SysTick, 10x 16-bit, 1x 32-bit and 1x low power)
ADCs	3x 16 bit (up to 36 channels)
UARTs	6 (two UART, three USARTs and one Low-Power UART)
I2Cs	3
SPIs	3
FDCANs	2
RTC	1
Datasheet	Datasheet
Reference Manual	Reference Manual
Programming Manual	Programming Manual
Board Manual	Board Manual

Flashing the Board

A detailed description about the flashing process can be found on the guides page. The board name for the Nucleo-G491RE is nucleo-g491re.