Microchip SAML10 Xplained Pro

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on Github.

View Doxygen Documentation View this board's documentation as generated by Doxygen.

View on GitHub View this board's source code on GitHub.

Tip

When using this board with RIOT, set the BOARD variable to saml10-xpro in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= saml10-xpro

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the Microchip SAML10 Xplained Pro board.

Overview

The SAML10 Xplained Pro is an ultra-low power evaluation board by Microchip featuring a ATSAML10E16A SoC. The SoC includes a SAML10 ARM Cortex-M23 micro- controller. For programming the MCU comes with 16KB of RAM and 64KB of flash memory.

Hardware

MCU

MCU	ATSAML10E16A
Family	ARM Cortex-M23
Vendor	Microchip
RAM	16KB
Flash	64KB
Frequency	up to 32MHz
FPU	no
Timers	3 (16-bit)
ADCs	1x 12-bit (10 channels)
UARTs	max 3 (shared with SPI and I2C)
SPIs	max 3 (see UART)
I2Cs	max 3 (see UART)
Vcc	1.6V - 3.6V
Datasheet	Datasheet
Board Manual	Board Manual

User Interface

1 User button and 1 LED:

Device	PIN
LED0	PA07
SW0 (button)	PA27

Implementation Status

Device	ID	Supported	Comments
MCU	saml10	partly	PLL clock not implemented
Low-level driver	GPIO	yes
	PWM	no
	UART	yes
	I2C	yes
	SPI	yes
	USB	no
	RTT	yes
	RTC	yes
	RNG	yes
	Timer	yes
	ADC	yes

Flashing the device

Connect the device to your Micro-USB cable.

The standard method for flashing RIOT to the saml10-xpro is using EDBG.